Products
Ecotec Renewable Energy supply ranges of both air source and ground source heat pumps suitable for a wide range of domestic and commercial applications.
All Ecotec Heat Pumps are purpose built for the UK climate to give considerable savings throughout the year, whatever the conditions.
Ecotec air source heat pump - EAS range
The Ecotec EAS range of air to water heat pumps set a completely new standard for winter heating efficiency, and hot water production. These units are ideally suited for all new build construction and retrofit installation, replacing existing, expensive to run, hot water heating systems.
The EAS units are available from 4.5kW to 30kW, and can be fitted to a domestic hot water cylinder to provide low cost hot water and heating, or cooling. Units can be cascaded to increase heating capacity or maximize control to create independent heating or cooling zones. These units are available as either single phase or three phase units unless otherwise stated.
Typical applications include:
Housing • Schools • Medical Centres
Office premises • Food production facilities
Swimming pools • Hotels • Spas
Benefits:
• EAS heat pumps are easy to install, needing
no ground works or bore holes.
• 50 to 60% savings over oil or electric heating.
• Quiet operation – less than 45dB @ 1m.
• Can be used for heating and cooling.
• Single phase or three phase supply versions.
Ecotec air source heat pump - EHS range
This range of Ecotec EHS heat pumps include stainless steel hot water cylinders combined with a heat pump for convenient installation. The cylinders are fully insulated and are fitted with sacrificial anodes to prevent calcium scaling. EHS cylinder units replace existing electric water heaters for more economical and environmentally friendly hot water production.
The units are designed for fast water heating times and are suitable for a wide range of uses, they are fitted with an in-built temperature controller, which will maintain the water at temperatures up to 60°C. The units are available as single phase versions only.
Typical applications include:
Hotels • Spas • Restaurants • Laundries
Residential Homes • Housing
Benefits:
• Designed for faster water heating times.
• 50 to 60% savings over oil or electric heating.
• Quiet operation – less than 45dB @ 1m.
• Low power consumption.
• Patented heat exchanger eliminates cross
contamination of water supply.
• Stand alone complete unit.
Ecotec ground source heat pump - EGS range
The Ecotec EGS range of ground source, water to water heat pumps, are purpose built for the UK market to give considerable savings whatever the climate. Available in sizes from 4.5kW to 75kW, these units can be connected to a domestic hot water cylinder to produce low cost hot water.
Their modular design means that units can be cascaded to increase heating capacity or maximize control across independent heating or cooling zones, to a maximum of 600kW.
Ecotec EGS heat pumps are ideal for new build or replacing existing boilers and electric heaters, they are easy to install and can save between 50 to 60% compared to oil or electric heating. These units are available as either single phase or three phase units unless otherwise stated.
Typical applications include:
Housing • Hotels • Swimming Pools
Medical Centres • Commercial Premises
Industrial Applications
Benefits:
• Ease of installation.
• 50 to 60% savings over oil or electric heating.
• Quiet operation – less than 45dB @ 1m.
• Can be used for heating or cooling.
• Single and three phase version available.
